banner



How To Limit Upload Speed On Router

If yous desire to limit a certain VLAN'south incoming bandwidth usage, for instance to limit a guest VLAN'southward download speed.

Step 1: Login in to your DSR. Click Advanced in height carte du jour bar. Once the page has refreshed, in the left hand menu, hover over Advanced Network then Traffic Direction, then click Bandwidth Profiles.

DSR_Set_a_bandwith_limit_for_incoming_traffic_for_all_IPs_on_a_specific_VLAN2

Step 2: If you lot accept not already washed so, you will demand to tick the "Enable Bandwidth Profiles" tickbox, then click Save Settings. Click Add to create the entering traffic limit.

DSR_Set_a_bandwith_limit_for_incoming_traffic_for_all_IPs_on_a_specific_VLAN3

Step 3: Proper noun the Profile, for instance if you are creating the profile for VLAN 2 entering traffic, you could name it VLAN2_Inbound. Change the Profile Type to "Rate". In the Minimum Bandwidth Charge per unit box, type the minimum bandwidth you would similar that VLAN to get. This can be set to any value between 1Kbps and the Maximum Bandwidth Rate value. Set the Maximum Bandwidth Charge per unit. This tin be any value from 100Kbps to 1000000Kbps. Set the LAN Interface to be the LAN you desire to limit bandwidth for.

D-Link

Step 4: Click Save Settings to save this contour.

Pace v: You demand to define a custom service for use in step 7. On the left manus carte, hover over Firewall Settings then click Custom Services.

D-Link

Step 6: Click Add together. In Proper name put "CS_ANY". For Type select "Both". Leave Port Type as "Port Range". In Starting time Port put "1", in Finish Port put "65535".

D-Link

Click Save Settings to save this setting.

DSR_Set_a_bandwith_limit_for_incoming_traffic_for_all_IPs_on_a_specific_VLAN7

Step vi: Hover over Advanced Network and so Traffic Management then click Traffic Selectors

D-Link

Click Add

Step 7: In the Available Profiles box, select the Profile we created earlier, in this case "VLAN_250_Inbound". In the Service box, select the service we created in Step 5 "CS_ANY". In the Traffic Selector Match Type box, select IP. In the IP Address box blazon "0.0.0.0". In the Subnet Mask box, type "255.255.255.0".

D-Link

Click Save Settings to save this traffic selector, and limit incoming traffic for all IP addresses on this VLAN.

Source: https://eu.dlink.com/uk/en/support/faq/routers/wireless-routers/dsr-series/uk_bandwith_limit_for_incoming_traffic

Posted by: parkerhicle1955.blogspot.com

0 Response to "How To Limit Upload Speed On Router"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel